KMB 18B with SF350 Regulator

• Weight: KMB 18 - 13.63 pounds
• Mask Frame: Fiberglass, polyester resin, polyester gel coat, and carbon fibers Mask Frame
• Control Knobs: Polyurethane
• Face Port/Lens: Scratch Resistant Polycarbonate
• Hood: Neoprene
• O-Rings: Buna-N
• Recommended Lubricants: Christo-Lube®, Dow Corning® MS4 Silicone Lubricant. Krytox® and Halocarbon® are also acceptable.
• Regulator: SuperFlow® 350 Performance. The SuperFlow® 350 regulator on the Kirby Morgan 18 & 28 masks offers high performance. The regulator has been tested at Dive Lab at Panama City, Florida. It meets all current U.S. Navy and European diving standards.
• Cage Code: The cage code for identifying KMDSI products for U.S. government purposes is 58366.
• CR Standards: These full face masks meet or exceed all standards established by Dive Lab of Panama City, Florida, and are CR (Commercially Rated) marked.
• CE Approved: The SL27 helmet is CE Approved.
• Temperature Limitations: Use at water temperatures below 33 °F (1 °C) requires use of hot water shroud (P/N 525-100) and hot water.
• Operational Specifications & limitations: Umbilical minimum I.D. 3/8” (9.5 mm) of not more than two sections, total length not to exceed 600 feet (183m). This mask meets or exceeds all requirements of NPD, Health and Safety, (U.K.), United States Navy, ADCI United States and is CR rated by Dive Lab, Panama City, Fla., USA. Recommended overbottom (OB)gas supply pressure for best performance at depths are calculated by the formula (fsw x 0.445+14.7) + recommended p.s.i. g. 
• Please note description is generic and for informaton purposes only. Please contact for exact details.